Products

Preet Reaper

Technical features of PREET REAPER
· 
All the Reaper parts are made by using Zig fixtures and dyes to give them complete interchangeability of parts.
· 
All the bearing sizes of the Gear and pulley shaft, pins of the star wheels etc. are done by grinding for proper bearing fitting.
· 
Whole of the machine is fitted by good quality nuts, bolts and spring washers to make it folding.
· 
C.I. brackets used are quality make.
· 
All the brackets used in Gear box and pulleys etc. are made out of Sera Sand Casting.
· 
All the bearings of the gear box, pulleys, star wheels & brackets are covered by seals & dust covers to protect from dust and are provided with grease nipples of good quality for proper greasing.
· 
The cutting finger of cutter bar is provided with ledger blade with sharp first quality blade of heavy duty 3mm is used.
· 
Conveyor belt provided to convey the crop vertically is made of two ply nylon belt 60mm of good quality.
· 
Heavy good quality V-belt pulleys are used and proper depth of V-section is made to increase thegrip and the life of the belt.
· 
V-belt used are of good quality like Fenner,Hilton etc. of standard company.
· 
Machine paint is done by spraying good quality Automotive Primer and paint.




Preet Harrow 8x8



Preet Harrow 9x9



Preet Harrow 9x9


Preet BT seed dril Machine